- All Titanium Bolts & Screws, if not color-treated, all the colors are the same, the metal is silver-white. How to ensure that it is consistent with the order material requirements? We will do a PMI test to determine that the grade and composition of the titanium screw are consistent with the order requirements.After making a distinction, the surface of the titanium screw will be marked or labeled to distinguish the products of different materials and grades to avoid mixing.
- Titanium Bolts & Screws are made of Titanium rods & bars. During the processing, the chemical composition and properties of the titanium rods * bars will be changed. Therefore, after making the titanium screws, we will select some finished Titanium Bolts & nuts. Sampling to test the chemical composition and properties of the final product.
- The Titanium rods & bars used to make the Titanium Bolts & Screws must be ultrasonically inspected to avoid defects inside the rod & bars. Otherwise, the processed Titanium Bolts & Screws may have excessive or bad teeth. Many Titanium Bolts & Screws are cheap because they are produced with titanium rods with residual scraps, which poses a high safety hazard and can cause damage to equipment.
- Titanium Bolts & Screws will undergo deformation in a small range within a certain period of heat treatment (after stress relief annealing), so the stocking time and the production of the order are required. And different products will be treated differently depending on the application.
- The CP Titanium Bolts & Screws are mainly used for their corrosion resistance, and are mainly used in Electroplating Industry, Chemical Industry, Heat exchangers, Condensers and other equipment. Titanium alloy Bolts & Screws are mainly used in racing Automobiles, motorcycles, mountain bikes, and subsea oil pipelines, and High Pressure Vessel accessories.and Marine applicationSpecially treated Titanium alloy Bolts &Screws have a tensile strength greater than 1100 MPA. These screws are mainly used in aircraft manufacturing, Radar, drones, ShipBuilding and Military equipment.
- Since the Titanium Bolts & screws need to be mass-produced, the minimum order quantity is 300 pieces per specification, and long-term cooperation of customers can be discounted to 100 pieces. In daily work, we often encounter 3-5 screws for inquiry. If we have stock or just close to the specifications, we can transfer the goods. If not, we only recommend similar specifications. Or we can provide the same size bars rolling, the customer replaces the bolts or the customer takes titanium bars and rods back and processes them. In order to meet the needs of customers, we always keep 20 tons Titanium Bolts & Screws in DIN for quick shipment.
Let us provide you with high quality Titanium Bolts & Screws. Quotes Now!
XOT Metals stocks a wide range of fasteners, including Titanium bolts, hex nuts, screws, threaded studs and washers. Our Titanium fasteners are available in a variety of sizes in stock, as well as additional sizes upon request. Titan Titanium products meet aerospace and industrial specifications, and are available in commercially pure grade 2 as well as Grade 5 Ti6Al4V.
• Standards: All DIN specifications & ANSI B18.2.3.4M.
• Size: M3 ~ M36 and All Inch sizes.
• Special sizes/specifications made upon order.
Titanium fasteners are lightweight, with high tensile strength and corrosion resistance to sea-water and chemicals. Titanium’s high melting point makes it suitable for use in high-temperature applications, e.g. in the aerospace, medical and marine sectors. Titanium have the unique ability to rapidly regrow their protective passive layer in the presence of oxygen, giving them unparalleled resistance to salt water environments.
There are many grades of titanium used to create fasteners; however, the main three are grades 2, 5, and 7. Then how to choose grade?
Titanium Grade-2 is two times stronger than 316 stainless steel, and is the most commonly used grade to manufacture titanium fasteners.
Titanium Grade-5 is two times stronger than grade 2, a true “workhorse” alloy with superior strength-to-weight and corrosion resistance.
Titanium Grade-7 is the most corrosion-resistant titanium alloy having 0.12-0.25% palladium, expensive than other all grades.
In Engineering, quest for perfection is crucial. Titanium fasteners are strong, lightweight, and corrosion-resistant. They are critical to many industries including chlor-alkali, marine, off-shore oil & gas, desalination, medical, and pulp and paper.
Titanium Fastener Stock and Availability: We keep stock size of commonly used fastener types and common sizes. If your requirement is non-standard, please contact us, we will make them for you. Just contact our Singapore office or contact our Indonesia Branch Office.
Urgent and time-critical requirements? Just let us know! We have a large stock of fasteners, ready to ship and will do our best to accommodate your needs even if your requirements need custom production.
